1
00:00:02,980 --> 00:00:05,650
Here's another example,
not as dramatic,

2
00:00:05,650 --> 00:00:11,160
of creating a photo
illustration out of photographs.

3
00:00:11,160 --> 00:00:14,710
But in this case, this
is also showing evidence

4
00:00:14,710 --> 00:00:19,100
that you are fabricating
the pieces in your device.

5
00:00:19,100 --> 00:00:24,180
This particular image is a CAD
image used by the researchers

6
00:00:24,180 --> 00:00:29,440
to show their device showing
the various fabrications,

7
00:00:29,440 --> 00:00:33,320
and this is how they used it
in their patent submission.

8
00:00:33,320 --> 00:00:36,320
But this is done in CAD.

9
00:00:36,320 --> 00:00:39,640
They also made a
picture of their device,

10
00:00:39,640 --> 00:00:42,240
but you really
can't see very much

11
00:00:42,240 --> 00:00:45,770
about their very
sophisticated ability

12
00:00:45,770 --> 00:00:48,100
to make the various layers.

13
00:00:48,100 --> 00:00:52,540
And so what I did was
I took that device

14
00:00:52,540 --> 00:00:56,980
and separated it into
the initial pieces

15
00:00:56,980 --> 00:00:59,400
that they did fabricate.

16
00:00:59,400 --> 00:01:04,239
I laid them out on a
background and decided

17
00:01:04,239 --> 00:01:10,500
to try to use these images
showing the layering of how

18
00:01:10,500 --> 00:01:12,380
the device is made.

19
00:01:12,380 --> 00:01:17,690
So out of these
images, I constructed

20
00:01:17,690 --> 00:01:23,100
a photo illustration of
those pieces using software.

21
00:01:23,100 --> 00:01:27,330
But these are real images that
you've just seen from before.

22
00:01:27,330 --> 00:01:30,360
Here's another way of
showing it, making it

23
00:01:30,360 --> 00:01:32,670
somewhat three dimensional.

24
00:01:32,670 --> 00:01:35,539
But basically, this is
a photo illustration

25
00:01:35,539 --> 00:01:40,009
of the layers of this
device not only showing

26
00:01:40,009 --> 00:01:43,470
how it works (with the
right labeling of course),

27
00:01:43,470 --> 00:01:49,300
but also showing that they did
indeed fabricate the layers.